Serach
 |
Item Details
Features
◈Wide bandwidth
◈Low insertion loss
◈High channel isolation
◈Exceptional reliability and stability
Applications
◈Optical amplifiers
◈CATV
FWDM Filter ( Filter Wavelength Division Multiplexer )
FTTX Filter WDM module extensively used in EDFA, Raman amplifiers, WDM networks, and fiber optics instrumentation is based on Thin Film Filter (TFF) technology. The device combines or separates light at different wavelengths in a wide wavelength range. It can expand the capacity of a single fiber to achieve bi-directional communication so that widely used in optical network upgrades and expansion, or introduce new comprehensive business, etc.
HJY provides filter-based wavelength division multiplexing (WDM) filter devices that are customized to the particular wavelength bands for your special applications. As you might know, the GEPON system itself works on 1310/1490, so the CATV signal here is delivered over the same fiber using 1550nm, and FWDM is a place where all this get's "mixed".
FWDM covers the following wavelength windows commonly used in optical fiber systems:
850/1310nm FWDM - for multi-mode fiber communication, CATV and testing instrumentation.
1310/1550nm FWDM - for WDM or DWDM optical communications.
1480/1550nm FWDM - for high-power DWDM optical amplifier and EDFA.
1510/1550nm FWDM - for DWDM multi-channel optical networks.
980/1550nm FWDM - for high performance DWDM optical amplifier and EDFA amplifier.
1310/1490/1550nm FWDM - for PON, FTTX and test instrument.
1310/1550/1625nm FWDM - for testing active fibers in service.
1310/1490/1550/1625nm FWDM - for combining or separating 1625nm channel with three triplex wavelength 1310nm, 1490nm and 1550nm so that 1625nm channel can be added into the existing triplex FTTH system.
Dimensions (mm)
Product Parameters
| Wavelength |
TX1550 RX1310/1490nm |
Technology | TFF (Thin Film Filter) |
| Passband | 1540~1565nm | Reflection | 1260~1500&1590~1650 |
| Passband ripple | ≤0.30dB | IL @ Passband | ≤0.60dB |
| Reflection band ripple | ≤0.20dB | IL @Reflection | ≤0.40dB |
| Transmission isolation (adj channel) | ≥30dB | Transmission isolation (non-adj channel) | ≥50dB |
| Reflection isolation | ≥15dB | Polarization dependent loss | ≤0.1dB |
| Polarization mode dispersion | ≤0.2ps | Thermal Stability | ≤0.005N |
| Directivity | ≥50dB | Return loss | ≥45dB |
| Optical power handling | ≤500mW | Temperature |
Operating -40 to 85°C Storage -40 to 85°C |
| Fiber type | SMF-28e | Package dimension |
Steel ∮5.5 x L34mm ABS 90*20*10nm |
Application Diagram
The Filter WDM system uses a Multiplexer at the transmitter to combine several wavelengths together, each one carry different signal with bite-rate up to 10G and a demultiplexer at the receiver to split them apart. Due to its low insertion loss, low polarization dependence and high isolation, the filter is widely used in CATV system, FTTx and PON system, Fiber Communication, Test Instrument and etc.
Ordering Information:
|
HJY-FW |
Package |
Connector Type |
U/A |
Wavelength |
Fiber Type |
Fiber Length |
Ports Type |
|
FW |
S: Steel B: ABS BOX Others |
0: No connector 1: LC 2: SC 3: FC 4: Others |
U: UPC A: APC |
T: Transmission wavelength range (nm) R: Transmission wavelength range (nm) |
9: 0.9mm Others |
005: 0.5+/-0.1m 01: 1.0+/-0.1m others |
Com
Reflect |
Note.
1) All the specifications are based on the devices without connectors, and guaranteed over wavelength, polarization and temperature.
2)PMD and chromatic dispersion values are guaranteed by design.
3) Specifications are subject to change without notice
2F,Hengxin Intelligent Science and Technology Park, Shuikou Sub-district Office, Huicheng District, Huizhou 516000, Guangdong, China
sales@huajiayu.com
86-18664306976
