Serach
 |
Item Details
Features
◈Wide band operation
◈Low insertion loss
◈Low PDL
◈High cross talk
◈High stability and reliability
Path without epoxy
Applications
◈WAN
◈Laboratory
Monitory & detection application
◈OADM
1X1 Mechanical Optical Switch
HJY' 1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future.
HJY' 1x1 Mechanical Optical Switch is not affected by the polarization and wavelength. It supports all wavelength at 850nm and 1260nm~1650nm, and it provides high reliability, low insertion loss, fast switching speed and bi-directional performance. They are widely used for multiplex OADM, cross connectors OXC, system testing and protection.
1x1 Mechanical Optical Switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The Fiber Optical Switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost.
Dimensions (mm)
Product Parameters
|
Operating Wavelength |
1260~1620nm(SM) / 850nm(MM) |
Insertion Loss |
≤1.0dB |
|
Wavelength Dependent Loss |
≤0.25dB |
Polarization Dependent Loss |
≤0.05dB |
|
Temperature Dependent Loss |
≤0.20dB |
Return Loss |
SM≥50dB / MM≥30dB |
|
Cross Talk |
SM≥55dB / MM≥35dB |
Switch Time |
≤8ms |
|
Repeatability |
≤±0.02dB |
Durability |
≥10 times |
|
Operating Voltage |
3 or 5V |
Switch Type |
Non-Latching/Latching |
|
Operating Temperature |
－20~＋70℃ |
Storage Temperature |
－40~＋85℃ |
|
Optical Power |
≤500mW |
Dimension |
27.0L×12.0W×8.2H mm |
Pin Definition
| Type | Pin definition | Power | Condition monitoring | ||||||
| FSW-1x1 | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 | |
| Non-latching | ----- | -- | -- | -- | -- | Close | Open | Open | Close |
| P1 - P2 | V+ | -- | -- | GND | Open | Close | Close | Open | |
| Type | Pin definition | Power | Condition monitoring | ||||||
| FSW-1x1 | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 | |
|
Latching |
----- | -- | -- |
GND |
V+ |
Close | Open | Open | Close |
| P1 - P2 | V+ | GND | -- | -- | Open | Close | Close | Open | |
Ordering Information:
| HJY-FSW | Wavelength | Operating Voltage | Fiber Type | Tube Type | Fiber Length | Connector | Package |
| FSW- |
0850—850 1315—1310&1550 |
3L—3v, latching 5L—5v, latching 3N—3v, Non-latching 5N—5v, Non-latching |
1—SM 2—MM 62.5/125 |
1—250um 2—900um |
00—special 05—0.5m±5cm 10—1m±5cm 15—1.5m±5cm 20—2 m …… |
0—NO 1—FC/PC 2—FC/APC 3—SC/PC 4—SC/APC 5—LC/PC 6—LC/APC 7—Other |
Bare fiber=1 900um tube=3 Special＝0 |
2F,Hengxin Intelligent Science and Technology Park, Shuikou Sub-district Office, Huicheng District, Huizhou 516000, Guangdong, China
sales@huajiayu.com
86-18664306976
